This chapter requires some careful study since it covers a simple but important process. This process is putting needle bars in tubes and adjusting the tube, bar and machine for proper tattooing. This will become second nature after awhile. Never, ever rush this process because if you’re not paying cióse attention to what you are doing, the needle tips are going to get all damaged. You are going to have to do this every time the tubes and needles are sterilized and the machine has to be put back together. If business is good and proper sterilization is done, you could be assembling machines several times a day.
Tubes and needles should be sterilized the fírst thing in the morning, assembled and wrapped in clean tissue until needed later in the day. Since this process is done for every tattoo (sterilization, assembling the tubes, needles and machines), it is easy to see how a person would rush this process, especially if people are waiting. (In this day and age, you have an obligation to every customer to be sure that this procedure is done correctly).
The key is to be absolutely familiar with the correct assembly process and make it a point to concéntrate every time the tubes are assembled.
New machines bought from suppliers should arrive properly set-up, but the tubes and needles are not sterile. They still have to be disassembled and sterilized. They should be studied to get familiar with a properly set-up machine. It is a good idea to buy at least two machines in the beginning. This way one will be already assembled from the manufacturer as you take the second one apart. This will be a good guide in case you forget how they go back together. Hopefully, any confusión here will be avoided with the information presented in this chapter.

Posted on July 25th, 2008 by admin
Tags: angel tattoo designs, angel tattoos, design your own tattoo, fairy tattoos

Filed under: Setting Tubes